Ideas & Feedback
Ideas: Connectivity & Reliability
Ideas about modems, SIM cards, failover, network monitor, HA cluster, SNMP and monitoring.
-
1
2
Network Monitor SNMP Traps SMS is lengthy
The {TRAP} variable includes the entire SNMP trap, which is typically a lengthy message. Is there a way to trim this so that only the fields corresponding to...
-
1
0
SMS Forward: Add Priority
It would be very helpful, if we could Prioritize SMS Forward rules.When monitoring large networks, and breakdown occur, we use an SMS Forward to send out inf...
-
4
0
Sms to signal
Make it possible is the smsforward rule to choose forward to SignalMigrated from the SMSEagle UserReport forum (2024-08-17). Legacy status: Completed.
-
1
4
Zabbix template for monitoring smseagle device
Zabbix template for monitoring smseagle device by snmp protocolMigrated from the SMSEagle UserReport forum (2023-01-10). Legacy status: Completed.
-
1
1
Monitoring of external temperature (1-wire) sensors with snmp
Monitoring of external temperature (1-wire) sensors with snmp. Please add more OIDS like .1.3.6.1.4.1.8072.1.3.2.4.1.2.4.84.101.109.112.1 for extenal sensors...
-
1
0
Signal Strength Survey
It would be nice if there was a survey mode to which you could temporarily switch to to find the best position for the antenna. If you have difficult signal ...
-
2
1
option on the GUI to add,amend or delete external ip address of the router
option on the GUI to add,amend or delete external ip address of the router, this should be added to any future updates.Migrated from the SMSEagle UserReport ...
-
1
2
Add an SYSLOG Server
For MonitoringMigrated from the SMSEagle UserReport forum (2022-01-06). Legacy status: Completed.
-
3
4
Network monitor - Repeat SMS every x minutes
Network monitor should trigger repeated sms every x (configurable) minutes, if the monitored resource is still down. This should make sure that no alert is m...
-
4
1
Network Monitor - SNMP Traps - Placeholders
Hello,currently SMSEagle, when it sends SMS based on SNMP trap, all info is stored in {TRAP} placeholder/variable. This means that there is no way how to sel...
-
1
1
Remote Access
If a VPN Server could be added it would enable in the case of standalone sites connection to building management control systems without the need for additio...
-
1
0
Automatically clear queued outbox on failover
HA Setup:In event of failover, the messages that were sent by the BACKUP unit are automatically deleted on the MASTER unit to prevent residual messages from ...
-
1
1
Multi-users: limit received sms a user can see filtered by modem/sim
To have a real multi users configuration it should be possible to limit access to modem/sim not only to send sms (as 4.0 have added), but also on those recei...
-
1
1
Callback URL & ModemNo
Would be nice to include the ModemNo for a Callback URL rule. So I can the modems (= recipient number) for different URL's.Migrated from the SMSEagle UserRep...
-
2
0
Failure Notification
Would be great to have email notifications on issues. E.g. if the modem has disconnected or failed to connect or sms failed to send etc.I recently had an iss...
-
1
1
Network Monitor / SNMP Protocol Version
With SNMP, protocol version 2 is not always the right choice. Please provide a selection so that the SNMP protocol version can be selected.Migrated from the ...
-
1
3
Network Monitor / SNMP
If a SNMP MIBS value rises above the threshold, an alarm is correctly triggered. This alarm is repeated every few minutes, which does not make sense. Can you...
-
1
1
Dependencies for Network Monitoring
It would be nice to have dependencies options in the Network Monitoring tool. For example, if a server ping fails due reboot,power outage or hardware/network...
-
7
2
SNMP configurable via Web-GUI
SNMP settings should be configurable via the Web-GUI, including at least community string, location, contact and access to it limitable to a specific host/ip...
-
2
0
Expose modem status information via API
It would be helpful to expose modem status information shown in the GUI (Modem Status: SIM1: Disconnected SIM2: Connected) via the API to enable remote devic...
-
2
0
Modem Selection option in periodic SMS
I have a dual sim SMS Eagle appliance.I would like to set "periodic sms" but there is not "modem selection" option.What can I do in order to set the modem th...
-
2
0
Adding local Static or dynamic IP address
Would be really useful to have a option on the setup to edit the static or dynamic ip address for the router on the smseagle.Migrated from the SMSEagle UserR...
-
6
3
sim cards with internet data
we use sim cards for the sms and the sim cards also has unlimited data. It would a good idea if the device could act as a hot spot for internet usage throug...
-
2
1
Option to disable network monitor task on interface down
To prevent notification floods, I would like for only one of our network monitor tasks to be active if the device interface is down.Migrated from the SMSEagl...
-
27
2
Sync at least Phonebook in an HA Cluster
In an HA Cluster, the Phonebook should be at least synchronised between the MASTER and BACKUP Nodes because this is the setting entity with the most data.Ano...
-
1
0
NTP Server
Possibility to use Eagle as NTP Server - Eagle sync time from gsm network and shares that time to connected devices as NTP Server.Migrated from the SMSEagle ...
-
7
4
For Dual Sim devices
It would be great if the system can be configured to define which sim card should the sms messages go through. e.g email 1 to Sim1 or Email 2 to sim 2, even ...
-
3
1
Access the api via 3g
It would be great if it was possible to use the 3g modems internet capabilities to initiate API calls from (firewalled of course).This way if my internet is ...
-
37
2
Add Signal strength on Home Page
Hi,Is it possible to ad signal strength directly on home page.ThanksMigrated from the SMSEagle UserReport forum (2016-09-13). Legacy status: Completed.
-
45
2
Allow IP address (Device) to send sms
I like to have a setting where I can define which IP addresses (devices) are allowed to send text messagesMigrated from the SMSEagle UserReport forum (2016-0...